YRTS series
YRTS Series
YRTS Series Description:
THB YRTS high speed series The outer structure is the same as YRT series, the difference is the inner structure, which make YRTS series limit speed higher than YRT series, the frictional torque is lower than YRT sries and uniform spread, so for lower frictional torque but higher speed application, this series bearings can be choosen, eg, bearing used for shaft which driven by direct drive motor. For the higher precision requirement, we can also offer the higher precision in axial direction and in radial direction.
Product List
Part NumberDimension (d)
(mm)
Dimension (D)
(mm)
Dimension (H)
(mm)
Dimension (H1)
(mm)
Dimension (H2)
(mm)
Dimension (C)
(mm)
Dimension (d1)
(mm)
Dimension (dn)
(mm)
Dimension (dm)
(mm)
the fixing hole
(The inner ring)
(do) (mm)
the fixing hole
(The inner ring)
(ds) (mm)
the fixing hole
(The inner ring)
(Ts) (mm)
QTY4)1The outer
ring (dL)
QTY4)2Screw connection
(QTY)
Connect screws
holes G
Connect screws
holes QTY
Pitch1)tTightening torque
of screw
(MA2)
Basic rated load
(Axial) (Ca) (KN)
Basic rated load
(Axial) (Coa) (KN)
Basic rated load
(Radial) (Cr) (KN)
Basic rated load
(Radial) (C0r) (KN)
Limited speed5)Grease
Lubrication (r/min)
Friction moment3
(Nm)
Weight (kg)
YRTS200 200 300 45 30 15 15 274 215 285 7 11 6.2 46 7 45 2 M8 3 48×7.5o 14 14 14 105 635 78-202 950 9.70
YRTS260 260 385 55 36.5 18.5 18 345 280 365 9.30 15 8.20 34 9.30 33 2 M12 3 36×10o 34 34 34 131 840 85-275 800 18.3
YRTS325 325 450 60 40 20 20 415 342 430 9.30 15 8.20 34 9.30 33 2 M12 3 36×10o 34 34 34 191 1260 109-300 680 25
YRTS395 395 525 65 42.5 22.5 20 486 415 505 9.30 15 8.20 46 9.30 45 2 M12 3 48×7.5o 34 34 34 214 1540 121-390 600 33
YRTS460 460 600 70 46 24 22 560 482 580 9.30 15 8.20 46 9.30 45 2 M12 3 48×7.5o 34 34 34 221 1690 168-570 500 45
Total 1 Page 5 Records
Products
Product Catalog